Plates
Structural Plate
Supplied Conditions:
Grade 300 | Grade 350 | |
---|---|---|
Specification |
AS/NZ 3678:2016 AS/NZ 1594 HA300 |
AS/NZ 3678:2016 AS/NZ 1594 HA350 |
Yield Strength | 300MPa | 350MPa |
Tensile Strength | 430-510MPa | 450-550MPa |
G300 L15 Mild Steel: NZ Standard: AS/NZ 3678-300 L15 (Precision colour code: Blue)
Length x width (mm) | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2400 x 1200 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
3000 x 1520 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||||||
3600 x 1520 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ||||||
3600 x 1800 | ✔ | ✔ | ✔ | ✔ | |||||||||
6000 x 1520 | ✔ | ✔ | ✔ | ✔ | |||||||||
6000 x 1800 | ✔ | ||||||||||||
6000 x 2400 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
9000 x 2400 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||||||
6000 x 3000 | ✔ | ✔ |
G350 L15 Medium Tensile: NZ Standard: AS/NZ 3678-G350 L15 (Precision colour code: Pink)
Length x width (mm) | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 60 | 80 | 100 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2400 x 1200 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ||
3000 x 15200 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||||||||
3600 x 1520 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ||||||||
6000 x 1520 | ✔ | ✔ | ||||||||||||||
3600 x 1800 | ✔ | ✔ | ||||||||||||||
5800 x 1800 | ✔ | ✔ | ||||||||||||||
6000 x 2000 | ✔ | |||||||||||||||
6000 x 2400 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
9000 x 3000 | ✔ |
Note:
All mill test certificates are available on request.
Weight Calculation:
Kilograms per square metre = length (m) x width (m) x plate thickness (mm) x 7.85
High Strength Plate Grade 80
Description:
A high strength quenched and tempered plate, Grade 80 is approximately three times stronger than mild steel.
Supplied Conditions:
Strenx 700MC | Bisalloy 80 | NSSMC Welten 780E | |
---|---|---|---|
Yield Strength | 700 | 690 | 686 |
Tensile Strength | 750 – 930 | 790 – 930 | 785 – 932 |
Elongation (16mm) | 15% min (3mm) | 18% | 25% |
Size Range : (Precision colour code : Red )
Strenx 700 Range:
Length x width (mm) | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 60 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
10000 x 1160 | ✔ | |||||||||||||
10000 x 1230 | ✔ | |||||||||||||
6000 x 1500 | ✔ | ✔ | ✔ | |||||||||||
10000 x 1500 | ✔ | ✔ | ✔ |
Bis80/ Welten 780:
Length x width (mm) | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 60 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6000 x 2500 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
8000 x 2500 | ✔ | ✔ | ✔ | ✔ | ✔ | |||||||||
6000 x 2100 | ✔ |
Note:
When fabricating high strength and wear-resistant plates special procedures must be followed.
All mill test certificates are available on request.
Weight Calculation:
Kilograms per square metre = length (m) x width (m) x plate thickness (mm) x 7.85
Wear-Resistent Plate Grade 450
Description:
Abrasion resistant steel plate which as a longer life expectancy than mild steel.
Abrasion resistance plate offer high resistance to both wear and impact applications.
This can be a cost effective choice for equipment subjected to high levels of impact wear.
Supplied Conditions:
GRADE 450 | Bisalloy 450 | Bisalloy 80 | NSSMC Abrex 450 |
---|---|---|---|
Tensile | 1320 | 690 | 1325 |
Elongation | 14% | 790 – 930 | 25% |
Hardness (HB) |
425 -450 | 18% |
410-490 |
Size Range : (Precision colour code : Orange)
Length x width (mm) | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 |
---|---|---|---|---|---|---|---|---|
6000 x 2500 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
8000 x 2500 | ✔ | ✔ | ✔ | ✔ | ✔ |
Note:
When fabricating high strength and wear-resistant plates special procedures must be followed.
All mill test certificates are available on request.
Weight Calculation:
Kilograms per square metre = length (m) x width (m) x plate thickness (mm) x 7.85
Mild Steel Chequer Plate
Description:
AS/NZS 1594:2002 HA1
Different plate patterns are available depending on source
Size Range: (Precision colour code: Green)
Length x width (mm) | 3 | 4 | 5 | 6 | 8 | 10 |
---|---|---|---|---|---|---|
2400 x 1220 | ✔ | ✔ | ✔ | ✔ | ||
3600 x 1520 | ✔ | ✔ |
Note:
All mill test certificates are available on request.
Weight Calculation:
Extra weight of chequers length (m) x width
(m) x 2.1 = kg/plate
Total weight: length (m) x width (m) x
thickness (mm) x 7.85 + extra weight = kg/plate
Atmospheric Corrosion Resistant
Description:
AS/NZS 1594:2002 HW350 JIS G3125:2010
SPA-H (Weathering Steel)
Size Range: (Precision colour code: Purple)
Length x width (mm) | 3 | 4 | 5 | 6 |
---|---|---|---|---|
2500 x 1250 | ✔ | ✔ | ✔ | ✔ |
3600 x 1520 | ✔ | ✔ | ✔ | ✔ |
Note:
All mill test certificates are available on request.
Weight Calculation:
Kilograms per square metre = length (m) x
width (m) x plate thickness (mm) x 7.85